analogue

Audio cassette transfer and Martin Parr’s The Non Conformists

1970s-audio-cassettes

We were recently sent a collection of recorded interviews with residents of Hebden Bridge, a mill town in the Pennines. They were recorded on regular, domestic tapes of the mid-1970s, the kind that were sold in shops such as Woolworths or WHSmith.

As magnetic cassette tapes go, these cheaper tapes can often deteriorate at a fast rate because they were aimed at a mass consumer market, and therefore not made with longevity in mind. These tapes however were in excellent condition, and no issues arose in the digitisation process.

Here is what Susie Parr told us about the project behind the tapes, and the publishing plans for the material later this year. We were very happy to be part of a creative project that will enable the stories to be shown to new audiences because of digitisation.

‘In 1975 photographer Martin Parr moved to Hebden Bridge, a mill town in the Pennines, with some friends from art school in Manchester. In a project that was to last five years, he started photographing the area, documenting a traditional culture and way of life that were slowly declining. Susie Mitchell, who also lived in Hebden Bridge, wrote about the people and places that Martin photographed. Together they built up a record of the day to day lives of mill-workers, game-keepers, coal miners, hill-farmers and chapel-goers. As part of their research, Susie and Martin would tape record their conversations with some of the characters they met. Thirty years later, the elderly audio tapes have been digitised and the photographs and texts are going to be published by Aperture in a book called The Non Conformists. In September, an exhibition will open in London.’

Below is an audio snippet of one of the tapes. This is a raw unprocessed version, notice the tape hiss inherent in these types of recordings. Sympathetic noise reduction to reduce this type of noise, can be process on these file if necessary.

parr-cassette-oral-history-snippet-1975

Posted by debra in audio tape, 0 comments

8 track cartridges and museum tour

8 track cartridges were a very popular domestic audio format in the United States, although there were also sold in the UK and Europe. The growth of the 8 track was synonymous with its use in car industry, as it allowed people to listen to music on the move.

Although phased out in the early 1980s as CDs became increasingly popular, the 8 track retains a cult following, as demonstrated by this video which takes a virtual tour around the 8 track museum in Dallas, Texas, USA.

At Great Bear we are equipped to transfer 8 track cartridges and NAB cartridges which were used primarily in professional contexts, such as to play jingles at radio stations.

 

Posted by greatbear in audio tape, 0 comments

Digitising U-matic tape: Diagnosing & Treatment

We have recently completed a job for Quarry Faces, the Mendip Hills Community Heritage Project which has been funded by the Heritage Lottery Fund. Quarry Faces gave us 20 U-matic video tapes that were commissioned for a corporate video in the 1980s.

The Quarry Faces project aims to tell the industry’s story, produce teaching materials for both educational purposes and general interest, and create an archive to preserve images and memories of quarrying over time.

This video we digitised was shot by Coloroll Films of Kilmarnock in 1985, and was delivered to us on U-matic tape. It features a giant walking crusher at Foster Yeoman’s Merehead Quarry (Torr Works).

Walking Crusher at Foster Yeoman Ltd’s Torr Works in 1985 from Quarry Faces on Vimeo.

The video tapes we were sent were high band recordings, rather low band and of very good quality. One AMPEX U-matic tape however was problematic as the tape shell / mechanism had degraded over time and needed careful hand rewinding and reshelling in a known good and newer cassette shell.

When faced with damaged tape, often people automatically assume it needs dehydrating, a process that forces the moisture out of the tape through stable, precise, low temperature baking. However if this is not what is wrong with the tape, dehydrating or ‘baking‘ as it is more commonly called, may in fact damage the tape. If you bake acetate tape that was commonly used in the 1950s and 1960s for example, it would be destroy it.

An oven used for baking tape

Ampex filed for a patent for the correct temperature to recover Ampex tapes. The patent referred to “a typical temperature used is 54’C. and a typical effective time is 16 hours”.

The simple truth is, there is no all encompassing answer to know what happens to tape when it degrades, or when the cassette shell mechanism malfunctions, and each tape that is sent to us is of course individual. Digitisation and the art of restoring old tape is a relatively new area, and no one has yet made a machine that is able to precisely diagnose what is wrong with each individual tape when problems occur. Is the tape suffering from sticky shed syndrome or binder hydrolysis, or is it ‘vinegar syndrome’, a condition which afflicts acetate tape? Only through careful diagnostic work, which at Greatbear includes using our range of in-house test tapes, can the correct remedy be found.

Posted by debra in video tape, 0 comments

The Grain of Video Tape

videotek-vtm-waveform-monitor-display

From U-matic to VHS, Betacam to Blu Ray, Standard Definition to High Definition, the formats we use to watch visual media are constantly evolving.

Yet have you ever paused to consider what is at stake in the changing way audio-visual media is presented to us? Is viewing High Definition film and television always a better experience than previous formats? What is lost when the old form is supplanted by the new?

At Greatbear we have the pleasure of seeing the different textures, tones and aesthetics of tape-based Standard Definition video on a daily basis. The fuzzy grain of these videos contrasts starkly with the crisp, heightened colours of High Definition digital media we are increasingly used to seeing now on television, smartphones and tablets.

This is not however a romantic retreat to all things analogue in the face of an unstoppable digital revolution, although scratch the surface of culture and you will find many people are.

At Greatbear we always have one foot in the past, and one foot in the future. We act as a conduit between old and new media, ensuring that data stored on older media can continue to have a life in today’s digital intensive environments.

 

 

Posted by greatbear in video tape, 0 comments

video machine room equipment racks / patchbay rewire

greatbear video racks

With the work we are involved with we have to use, keep working and store a large amount of old and usually large tape machines and other electronics. With a couple of machines it’s easy to store and easy to connect but as you grow and the variety and scope of machines develops it can soon become a wiring and space nightmare.

Racks and patchbays are the answer and the time’s come to rewire our racks as many new / old machines have joined our collection as has different types of digitising work. Key to this is the need to accurately monitor and digitise several sources while having the flexibility to change the workflow quickly whenever.

Richard from westent is providing support in this video redesign and it will be an interesting challenge mixing the old with the new to get the highest quality transfers with the most efficiency.

Posted by greatbear in video tape, 0 comments

Repair Teac A3440 4 track Multitrack Reel to Reel

The Teac A3440 is a classic reel to reel tape recorder from the late 1970s, early ’80s significant in that you could use it to make 4 track multitrack recordings at 15 inches per second, the professional tape recording speed. At the time there was precious little else around at the price to do this so this machine was perfect for small bands and studios who didn’t have the wallet busting amounts needed to buy a larger format 16 or 24 track recorder.

While the A3440 isn’t the last word in high quality analogue recording it has had some significant users in the past none less than Lee Perry who’d used the earlier but similar A3340 on his Heart of the Congos album.

the problems

This machine didn’t initially look heavily used, the heads had little wear but it hadn’t been used in a long while and there was a heavy build up of tape residue on the whole tape path. The capstan was very dirty and in these cases xylene is a more effective cleaner than IPA but don’t get it anywhere near plastic!

This A3340 powered up but the right hand tension arm was hanging at an odd angle and it wouldn’t play or wind.

Time to take it apart – the fake wood sides and rear panels get removed and it’s pretty easy to see what one of the problems is.

teac-a3440 sticky broken capstan belt

A very nasty ‘melted’ rubber capstan belt that took a fair while to scrape and clean off with IPA.

A new belt has purchased online – Teac parts in the UK are a big pain to get hold of through the official channels and I’ve given up contacting them unless I’m desperate for a part I can’t find anywhere else.

The other lack of drive was caused by broken micro switches. When the right hand tension arm is moved up, two micro switches behind the front panel switch power on for the capstan and reel motors. As this arm can get a los of use / abuse it’s common for the micro switches to crack. Both on this example were broken as was the small plastic piece that stops the arm moving too far down.

the repairs

To replace the capstan belt:-

  1. Remove both screws holding the capstan flywheel against the front panel.
  2. Make sure the flywheel is cleaned of all old belt debris.
  3. Make sure the motor wheel is cleaned of all old belt debris.
  4. Refit new belt over small motor wheel, then flywheel.
  5. Replace bracket remove in part 1, making sure you’ve cleaned off the old grease and regreased where the end of the capstan shaft can run.

Although not essential I took the opportunity to remove the whole capstan shaft, clean, check for wear and reoil before putting back. If you do this you will need to reset the endfloat though.

microswitches

teac a-3440 capstan motor micro switch

It’s not possible or worthwhile trying to repair the microswitches as the modern equivalent that fits perfectly is very cheap. Two were purchased from Farnell and replacement is just a case of:

  1. Unscrew and move away the control PCB to get more space
  2. Make a note of or photograph wiring connections for switches.
  3. Unscrew and carefully desolder the existing microswitches.
  4. Connect wires and solder the new switches in.

The arm end stop was repaired easily with strong super glue and after many hours is still holding.

is it working?

In a word, kind of! The belt and microswitches got the deck and transport moving. It will pull tape and make a noise which is great but an annoying intermittent problem started to appear after some initial testing.

When play or wind are selected, large solenoids clunk and release the reel brakes and move the pinch wheel. This was working BUT occassionally and only in play the right reel brake solenoid didn’t move, leaving the brake on, causing the tape speed to slow, back tension to increase and wow to go crazy!

See our next post for the repair of this problem…

Posted by greatbear in audio tape, audio technology, machines, equipment, 7 comments

Tape mould cleaned and removed. Rare lost masters recovered and preserved for Druidcrest Ltd

Punk Rock Classics tape label

We have recently worked on probably the worst looking tapes but with some of the best sounding music recordings we’ve seen for a while! A batch of 10.5″ NAB studio masters had bad tape mould growth.

Andy Leighton, owner of Bolex Brothers and music publisher of the Rocky Horror Show, found a batch of studio masters on quarter inch tape that had been growing mould for some of them over 30 years. All of these recordings had been made at the renowned Sound and Recording Mobile studios better known as SARM, later creative home of Trevor Horn.

First ever recording at SARM studios

 

Among these tapes was the first ever recording made at SARM in 1972 by Richard o’Brien, writer of the Rocky Horror Show, in addition to rare tracks by artists such as Kimi and Ritz.

When the tape mould was finally cleaned from the tapes and some of them baked for binder hydrolysis the quality of the recordings was very high and testament to the high quality available from analogue recording. Even though tape can be vulnerable to physical problems, it is also robust. If these had been tape-based digital recordings, in the same condition, I doubt we’d have been able to achieve the same results.

Posted by greatbear in audio tape, 2 comments

Replace pinch roller on Sonifex NAB Cartridge machine

Once a common sight in Radio stations around the world, the NAB Cartridge machine or Fidelipac was used for short jingles and announcements, sometimes even for longer recordings. Using a similar sized cartridge to a domestic 8 track machine the NAB cartridge was different in that the pinch roller was not in the cartridge but would hinge up in the player and hold the tape against the capstan. Running at 7.5 inches per second (ips) compared to 3.75 ips in domestic cart machines the recording and reproduction quality good be very good but it was the ease of use and cueing ability offered by these machines that made them so useful in broadcasting.

We have Sonifex cart machines that while very well built do have rubber parts that will degrade over time and reduce the transport performance. Luckily we have some of the last remaining stock of new pinch rollers, motors and capstan drive belts.

The pinch roller in one of our machines had become quite hard and the rubber shiney over time. A pinch roller in this state may not hold the tape as securely and could also have flat spots both leading to increased wow and flutter and poor tape handling. These pinch rollers also have high quality cartridge bearings pressed into their shell. Over time these loose their lubrication, wear, become rough feeling and will also add to poor tape handling.

Older, fragile and valuable tape must be handled and used carefully. A ‘chewed’ tape caused by a poorly maintained tape transport in any tape machine, audio or video is a disaster and hard to recover from perfectly.

Sonifex NAB cart pinch rollers

Both halves of the cart machine case need to be removed to easily change the pinch roller. While the access is good and the machine, in this case a Sonifex microHS, had been designed for easy servicing the pinch roller is still a little fiddly to get to so I removed the transport from the main chassis.

Sonifex NAB cart machine microhs transport removed

To remove the pinch roller a small slightly hidden C clip must be removed you can see in the image above the slot machined into the roller shaft where it sits and holds the roller. This is hard to remove as the plastic bush on top of the roller stops you getting a small screwdriver in. I managed to remove the C clip with some fine circlip pliers. Be careful not to loose the clip if you don’t have spares, they fly away very easily!

Now the new roller can be placed on the shaft. It’s a good idea once all the transport is out to give everything a good clean with IPA.

Sonifex microHS new pinch roller

On this machine, the castan drive belt was quite slack so a new one was fitted, which is easy now the transport is removed. First though the capstan flywheel and motor pulley were cleaned of all the old rubber belt residue that tends to accumulate over time.

Sonifex NAB cart machine capstan flywheel

The last thing to do is check the pinch roller pressure. This is important to as to high or too low will increase wow and flutter, increase wear to the bearings and capstan surface and give poor tape handling. Due to the design of these NAB cart machines, the pinch pressure needs to be checked with a special cartridge. The pinch pressure is then adjusted from a screw pot on the top PCB seen outlined below in green.

NAB cartridge pinch pressure adjustment

That’s it, time to play carts again.

Posted by greatbear in audio tape, audio technology, machines, equipment, 16 comments

Replace Tascam BR 20 Capstan Belt

We have two of these excellent machines in addition to our Sony APR 5003s and Studer A80s. The Tascam BR-20 was Tascam’s last and top of the range 1/4 inch reel to reel tape machine and available in two track stereo and stereo with centre timecode option.

The capstan drive in the BR20 is belt driven by a wide belt. Both belts in our machines looked OK but we’ve replaced all roller bearings, belts and pinch rollers in both of our machines anyway as a matter of course. These parts are still available from Teac UK via Acoustic Services on 01-844-347600.

Below is a simple explanation of how to change the capstan belt.

Tascam / Teac BR 20 rear panel removed

  1. Unplug machine from mains power and move to a strong stable base.
  2. Remove cross head screws from the rear panel and lift plate off. Depending on the type of plug in your country you may not be able to remove it completely.
  3. You’ll now be able to see the capstan motor and it’s control board attached to it.
  4. Remove the 4 cross head screws and gently lift the analogue audio output board away from the machine as in the picture above.
  5. We now need to remove the whole capstan motor assembly with the control board still attached. Remove the 4 cross head screws right at the front of the assembly, NOT the six nearest to you when looking at this image. 
  6. Carefully unclip the 4 cable connectors from the motor control board. The other connector cannot be removed from the board and must be removed where it connects to the other board. Tascam BR 20 capstan motor board with cables removed
  7. The whole assembly can now be lifted out from the machine. Be careful to not snag any cables and remember to unclip the black cable ties.
  8. You’ll now be able to unclip the control board from the assembly by carefully compressing the black clips with some needle nose pliers.
    Tascam BR 20 capstan motor board unclipped from assembly
  9. Now remove the six cross head screws holding the capstan motor assembly together. This is the only way to remove and refit the capstan belt. There’s not enough room to do it any other way!
  10. Now you can remove the old belt and capstan shaft. It’s a good idea to clean the capstan with IPA where the old belt has run and reapply a little grease to the bearing end of the capstan.
  11. Fit your new belt and reassembly is the reverse of dissasembly! Be careful though to not drop the screws into regions you can’t get them out of – luckily there aren’t that many on this machine but a long magnetic screwdriver is very useful.. just don’t get it anywhere near the headblock and heads!
    New Teac capstan belt for Tascam BR20 reel to reel tape machine
Posted by greatbear in audio tape, audio technology, machines, equipment, 4 comments

Tascam BR 20 reel to reel new in box (not for sale)

Tascam Br 20 reel to reel tape machine box

This is something you don’t see everyday! An almost unused and boxed 1/4″ 2 track reel to reel tape machine, a Tascam BR20 one of their highest quality machines sometimes installed with a Timecode head for broadcast and editing applications.

This machine somehow turned up at an IT Recycling centre in Essex but is now in much safer hands transferring tapes, in particular a very large archive of library music on 10.5″ NAB reels owned by Mood Media Ltd.

As you can see this machine is in its original box, with packaging and first look at the heads show almost no head wear but some nasty oxide that took a while to clean off.

This machine needed little work to bring it back to spec, a new capstan belt, pinch roller, tape tension and speed setting and a full calibration.
The capstan belt change is the subject of another blog post here..

Tascam BR 20 reel to reel tape recorder

Posted by greatbear in audio tape, audio technology, machines, equipment, 12 comments

JVC PV-4800E 1/2 inch EIAJ colour portable video recorder

jvc_pv_4800e_reel_to_reel_colour_video_recorder

A recent addition to our video arsenal is this rare 1976 vintage 1/2″ colour reel to reel machine.

This has needed some work to get it functioning well such as new belts, hardened grease cleaned off the mechanism, etc but is now able to transfer colour recordings made in this format of reel to reel video.

A more detailed article on the repair of this will appear soon as will information about our other reel to reel video machines, the Hitachi / Shibaden EIAJ machine, the Sony CV-2100 skip field VTR and the enormous Ampex VPR-2B 1″ video machine… and we’ve got two of these!

Thanks to Rich at www.labguysworld.com for the JVC service manuals.

Posted by greatbear in video tape, video technology, machines, equipment, 0 comments

Information Terminals M-300, cassette tape transport alignment gauge

The regular service of analogue machines which will involve the mechanical alignment then electrical alignment / calibration is really important if you’re attempting to get optimum transfers and reduce any risk of damaging the potentially fragile tape.

While some of our machines are serviced by others we like to regularly check them and have gradually brought our regular servicing in house. Of course this needs specialised tools, test tapes and gauges, often totally unavailable new now.

On a lucky eBay day I happened to win one of these beauties, an Information Terminals M-300 gauge. This enables you to accurately set the tape guide height and also the head stroke. It is a universal gauge and can be used across many decks.

information_terminals_m300-boxed copy

Nakamichi tape deck owners have had a hard time doing this part of their servicing as the original Nakamichi gauges are very very rare now as is this.

A member of the naktalk mailing list though recently borrowed our gauge and has had it measured and will soon have a small batch CNC machined and made available. These remanufactured gauges will have a few small modifications to improve the design.

Thanks to Willy at www.willyhermansnervices.com many more tape deck transports will be able to be aligned correctly.

Posted by greatbear in audio tape, 13 comments

U-matic transfer to DVD, Uncompressed Quicktime and Digi Beta

sony_bvu_950p_umatic

We’ve been honored recently to have won a large contract to help in the digital migration of an extensive educational video archive by the transfer from U-matic archive copies to uncompressed video files.

While the archive had been stored in an suitable environment and rarely if at all played, they had not survived well. The Sony branded tapes from the 1970s and 1980s all exhibited binder hydrolysis or sticky shed syndrome. We were still able to get good transfers though using our range of U-matic machines, particularly the Sony BVU-950P and For-A Time Base Corrector.

Posted by greatbear in video tape, 12 comments

Microcassette Transfer to CD helps Crown Court case

www,mowbraywoodwards.co.uk

We’ve recently been involved, with Mobray Woodwards Solicitors,  in the audio transfer of important evidence in a  local Crown Court case.

Even given the poor quality or the recordings, made on the slowest tape speed of 1.2 cm/s we were able to make transfers to CD which were clear and understandable with CD track markings for easy access to specific sections of the audio.

Microcassettes, until recently, were used regularly for voice recording in small, portable dictaphone type of machines. Their fidelity is not high but when used for voice it is usually acceptable.

Greatbear are able to transfer all formats and speed of microcassette in addition to 1/2 speed standard cassettes that were common for voice recording of interviews and meetings in the police service, inquests, etc.

For more information on high quality audio tape transfer and restoration please visit our transfer pages.

Posted by greatbear in audio tape, 0 comments

Video Tape Transfer, Copy to DVD, DV or uncompressed AVI

Over the last 12 months we’ve seen this side of our business grow and adapt to the range of transfer needs that individuals, businesses and media creation organisations have.

We are able to support a wide range analogue and digital, consumer and professional video formats from the late 1970s onwards such as: Betamax, VHS, SVHS, VHS-C, Video 2000, 8mm, Hi8, U-matic, Betacam, miniDV, DVCAM, etc.

We offer straight video transfer to DVD and a higher quality transfer service to DV or  uncompressed AVI which can then be supplied on hard drive, edited, encoded to a very high quality DVD or supplied on digital tape.

Update 2019! We offer a range of new delivery formats for our video transfers. We use the International Association of Sound & Audiovisual Archives Guidelines for the Preservation of Video Recordings, delivering FFV1 lossless files or 10 bit uncompressed video files in .mkv or .mov containers. We create viewing files as H264 encoded .mp4 files or DVD. We can deliver any other digital video files, according to your needs. 

We pride ourself on our positive, friendly service and are happy to give advice over the phone or by email. When you call us you won’t be stuck in a voicemail system or told we’re an internet company so don’t like speaking on the phone!

Feel free to contact us by phone or email.

Posted by greatbear in video tape, 0 comments

Tascam 234 4 track cassette capstan belt replacement

I’ve had these belts sitting around for a few months now and they’ve finally come around on my to do list. Thinking this would be nice and easy like the Teac C-3x belts I whipped the cover off my 234 eager to put it back to work transferring those thousands of undiscovered bedroom gems that must be around in peoples’ cupboards.

Tascam 234 4 track tape transport

Tascam 234 4 track tape transport

Looked nicely laid out and well constructed as all this old Tascam equipment seems to be. I thought I’d just take the transport out and it’d be easy. There are just two belts in the 234, the capstan belt and the belt that moves the transport up and down. This cam mode belt had stretched and come off and the capstan belt had pretty much disintegrated. Once I start I find it hard to stop and this isn’t a quick job the first time, you need to be methodical and patient, good screwdrivers help too.

Well here comes the process, it seems pretty daunting at first when you see how many boards, cables and bits you have to remove and disassemble to replace the belts.

Continue reading →

Posted by greatbear in audio tape, audio technology, machines, equipment, 26 comments